HP Removable Adhesive Fabric (3-in Core) - 1524 mm x 30.5 m

HP Removable Adhesive Fabric (3-in Core) - 1524 mm x 30.5 m

Easy to install, reposition, and remove

Enjoy the ease of working with this repositionable adhesive-back fabric that is easy to install, reposition, and remove with virtually no residue. The special adhesive is designed to stick to non-porous surfaces to create seamless, photographic image quality wall graphics. Use on indoor smooth floor surfaces in dry conditions.

Reduce the environmental impact of printing

Offer an adhesive fabric that complies with high health standards. Help meet environmental and safety objectives with this REACH compliant,1 flame-resistant2 adhesive fabric.

Grab attention with vibrant image quality for a variety of applications

Capture realistic graphic detail for applications from wall murals and event signage to retail displays. Achieve a high-quality look with this versatile, easy-to-handle, repositionable self-adhesive fabric—ideal for a wide range of indoor and outdoor applications.

Benefits

        Designed for easy installation, repositioning, and removal without wrinkles or tearing for a wide range of applications
        Ability to contour cut and apply without stretching
        Smooth, matte finish for deep blacks, vivid colors and high ink saturation
        Outstanding photographic image quality
        Class A, ASTM E84 flame resistance2
        REACH compliant1
        Original HP Bright Office Inks, HP Vivid Photo Inks, and HP Latex Inks
        Designed for use on smooth indoor floor surfaces in dry conditions
Applications

        Wall murals
        Wall cut-outs
        Indoor and short-term outdoor signage
        Point-of-purchase displays
        Trade show graphics
        Decals
        Window graphics
        Floor graphics
Sizes available :

        8SU06A: 1067 mm x 30,5 m (42 in x 100 ft)
        8SU08A: 1372 mm x 30,5 m (54 in x 100 ft)
        8SU09A: 1524 mm x 30,5 m (60 in x 100 ft)       
Technical Specifications

        Material: Polyester fabric
        Weight (With liner): 289 g/m² per ISO 536 Test Method
        Thickness (With liner): 304 microns/12 mil per ISO 20534 Test Method
        Liner: 120 g/m², double-sided PE-coated silicone paper
        Adhesive: Clear, removable, and repositionable adhesive
        Removability: Up to 3 years removable/repositionable indoors
        Opacity: Greater than 85% per TAPPI T-425 Test Method and ISO 2471 Test Method
        Brightness: Greater than 87% per Tappi-T452 Test Method
        Whiteness: 118 per ASTM E313-98 Test Method
        Finish: Matte
        Operating temperature: 15 to 25° C / 59 to 77° F
        Operating humidity: 20-80% RH
        Water resistance: Moderately water-resistant3
        Wind orientation: Print side out
        Core size: 3-in core with a removable 2-in core adapter
        Dry time: Immediate
        Flame resistance: Class A, ASTM E842
        Lamination: For additional protection, liquid or spray coatings are recommended
        PageWide Cutter: The weight of this material is higher than the recommended weight limit for the HP PageWide XL cutter, which may reduce the expected life of the cutter
        Shelf life: 1 year, unopened in original packaging
        Storage temperature: 10 to 27° C / 50 to 80° F
        Storage humidity: 35 to 65% RH
        Environmental: REACH compliant1
        Finishing/post-processing: Use a carbide knife for kiss and die-cutting
        Installation tip: To install the graphic, peel 101 millimeters (4 inches) of the release liner off the graphic and place on wall or surface. Continue to peel back 101 millimeters (4 inches) of the liner incrementally while mounting.
        Country of origin: Product of China and Malaysia

Write a review