HP Recycled Removable Adhesive Fabric, 3-in Core (Latex/solvent) - 1524 mm x 30.5 m

HP Recycled Removable Adhesive Fabric, 3-in Core (Latex/solvent) - 1524 mm x 30.5 m

Easy to install, reposition, and remove
Enjoy the ease of working with this repositionable adhesive-back fabric that is easy to install, reposition, and remove with virtually no residue. The special adhesive is designed to stick to non-porous surfaces to create seamless, photographic image quality wall and floor graphics.

Made with recycled water bottles and coating materials
This REACH compliant adhesive fabric is made with recycled water bottles and coating materials. Recycling beverage containers (and other materials) saves energy, reduces greenhouse gas emissions, and diverts material from landfills.

Grab attention with vibrant image quality for a variety of applications
Capture realistic graphic detail for applications from wall murals and event signage to retail displays. Achieve a high-quality look with this versatile, easy-to-handle, repositionable self-adhesive fabric—ideal for a wide range of indoor and outdoor applications.

Benefits:

Designed for easy installation, repositioning, and removal for a wide range of applications
Ability to contour cut and apply without stretchi
Smooth, matte finish for deep blacks, vivid colors and high ink saturation
Outstanding photographic image quality
B1, ASTM E84 flame resistance
REACH compliant
Compatible with Original HP Bright Office Inks, HP Vivid Photo Inks, HP PageWide XL pigment inks, and HP Latex Inks
Slip-resistant for floor graphics
Applications :

Wall murals
Wall cut-outs
Indoor and short-term outdoor signage
Point-of-purchase displays
Trade show graphics
Decals
Window graphics
Floor graphics
Available sizes:

4A4M5A : 1372 mm x 30.5 m (54 in x 100 ft)
4A4M6A : 1524 mm x 30,5 m (60 in x 100 ft)
Technical specifications:

Ink compatibility: Compatible with Original HP Latex Inks; also solvent, low-solvent, and UV-curable inks
Weight (With liner): 320 g/m² per ISO 536 Test Method
Thickness (With liner): 304 microns/12 mil per ISO 20534 Test Method
Liner: 140 g/m², double-sided PE-coated silicone paper
Adhesive: Clear, removable, and repositionable adhesive
Removability: Up to 3 years removable/repositionable indoors
Opacity: Greater than 99% per TAPPI T-425 Test Method and ISO 2471 Test Method
Brightness: Greater than 90% per TAPPI-T452 Test Method
Whiteness: 120 per ASTM E313-98 Test Method
Finish: Matte
Slip rating: In compliance according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586)
Operating temperature:15 to 25° C / 59 to 77° F
Operating humidity: 20-80% RH
Water resistance: Water resistant
Wind orientation: Print side out
Dry time: Immediate
Flame resistance: B1, M1 and ASTM E8411 approved fire certifications
Shelf life: 1 year, unopened in original packaging
Storage temperature: 10 to 27° C / 50 to 80° F
Storage humidity: 35 to 65% RH
Environmental: Adhesive fabric made with recycled water bottles and coating materials, REACH compliant
Finishing/post-processing: Use a carbide knife for kiss and die-cutting
Installation tip: To install the graphic, peel 101 millimeters (4 inches) of the release liner off the graphic and place on wall or surface. Continue to peel back 101 millimeters (4 inches) of the liner incrementally while mounting.
Country of origin: Product of China 

Write a review